3D CAM Programming
| Rakennetyyppi: | Opintojakso |
|---|---|
| Koodi: | IKTA2703 |
| Tyyppi: | Pakollinen / Ammattiopinnot |
| OPS: | KT 2017 |
| Taso: | Insinööri (AMK) |
| Opiskeluvuosi: | 2 (2018-2019) |
| Laajuus: | 5 op |
| Vastuuopettaja: | Lindberg, Pertti |
| Opetuskieli: | Englanti |
Toteutukset lukuvuonna 2018-2019
| Tot. | Ryhmä(t) | Opiskeluaika | Opettaja(t) | Kieli | Ilmoittautuminen |
|---|---|---|---|---|---|
| 2 | I-KT-2N | 31.8.2018 – 21.12.2018 | Pertti Lindberg | Suomi | 20.8.2018 – 17.9.2018 |
Osaamistavoitteet
The student will be able to create mfg files for a 2-5 axis NC machine by means of HH, Fanuc and NX software, from the manufacturing model to the simulation and postprosessingand testing. The student will obtain a step-by-step knowledge of the complete process.
Opiskelijan työmäärä
Total work load of the course: 135 h
- of which scheduled studies: 65 h
- of which autonomous studies: 70 h
The assessment of student’s own learning 1 h is included in contact lessons.
Edeltävät opinnot / Suositellut valinnaiset opinnot
IKTA2501 3D Modeling and ProductLifecycle Management
Sisältö
Creating the mfg assembly, defining the MCS and the clearance plane, defining the part and the blank. Creating and testing various operations. Creating CLSF data files and postprocessing and editing the HH files.
Opiskelumateriaali
Handouts provided by the teacher.
Opetusmuoto / Opetusmenetelmät
Lectures and exercise and use of NC-machines.
Arviointikriteerit
5: The student is able to utilise the methods learnt during the study unit independently and is able apply the learnt knowledge in new contexts.
3: The student is able to utilise the methods learnt during the study unit independently.
1: The student is able, with guidance, to utilise the methods learnt during the study unit.
Arviointimenetelmät
Exercises and quizis.