VAMK

Vaihda kieltä: English

Etusivu > Arkistoidut koulutukset > Kone- ja tuotantotekniikka (I-KT) > 2013EM > Vuosi 2 > 3D CAM Programming (NX) (IMEP0203)

3D CAM Programming (NX)

Rakennetyyppi: Opintojakso
Koodi: IMEP0203
Tyyppi: Pakollinen / Perusopinnot
OPS: I-KT 2013EM
Taso: Insinööri (AMK)
Opiskeluvuosi: 2 (2014-2015)
Laajuus: 4 op
Vastuuopettaja: Lindberg, Pertti
Opetuskieli: Englanti

Toteutukset lukuvuonna 2014-2015

Tot.Ryhmä(t)OpiskeluaikaOpettaja(t)KieliIlmoittautuminen
3I-EM-5N1.9.2014 – 20.12.2014Pertti LindbergEnglanti15.8.2014 – 14.9.2014

Osaamistavoitteet

The student will be able to create mfg files for a 2-5 axis NC machine by means of NX software, from the manufacturing model to the simulation and postprosessing. The student will obtain a step-by-step knowledge of the process.

Opiskelijan työmäärä

Total work load of the course: 108 h
- of which scheduled studies: 56 h
- of which autonomous studies: 52 h

Edeltävät opinnot / Suositellut valinnaiset opinnot

IMEP0202 3D Modeling and Product Lifecycle Management (NX and Teamcenter)

Sisältö

Creating the mfg model and operation containing machine tool, co-ordinate system and retraction surface. Creating NC Sequences and their simulation. Creating CL data files.

Opiskelumateriaali

Handouts provided by the teacher.

Opetusmuoto / Opetusmenetelmät

Lectures and exercises, use of NC-machines.

Arviointikriteerit

5: The student is able to utilise the methods learnt during the study unit independently and is able apply the learnt knowledge in new contexts.
3: The student is able to utilise the methods learnt during the study unit independently.
1: The student is able, with guidance, to utilise the methods learnt during the study unit.

Arviointimenetelmät

Exercises and examination.


Takaisin